The Power Mac 7200 made its debut in the summer of 1995 as part
of the second generation of Power Macs, which also included the
7500, 8500 & 9500. This generation of Power Macs turned its
back on the NuBus slot, in favor of 3 PCI slots in each model, and
replaced SIMMs for DIMM type memory.
The 7200/75 was the entry level model of the Power Mac line and
was aimed primarily at the business, home office and consumer markets.
A few corners were cut to keep costs down. The 7200s accepted less
RAM than their brethren, the CPU was not replaceable and the cache
& RAM busses were only 64-bits wide (as opposed to 128)
In fact on the 7500/75 no L2 cache was installed, though the option
to add one was available. Adding a L2 cache can significantly improve
the processing performance of the machine.
This machine came with 1 MB of VRAM which can be upgraded to 2
MB for 24-bit color on 17 inch monitors
Though the 601 PowerPC processor is soldered to the motherboard
Sonnet has engineered an upgrade for this machine that utilizes
one of the PCI slots.
The 7200 was considered inexpensive at the time and sold very well.
Great Prices On Upgrades Check The Vendors Below
Below you will find the MacBench 4.0 results for most of
the processor upgrades available for this machine.
** Note that MacBench does not take advantage of the Velocity
Engine (AltiVec instructions) of the G4. For AltiVec accelerated applications
you can see a 1.4 to 4 times performance improvement over the G3, depending
on the application and the functions you are trying to perform.
"But I thought that the G4 was so much faster than the G3?"
In some cases it is! For G4 Application specific scores - Click